Asiakas:
Motonet OyKategoriat
Used Pallet Racks
KongamekWhen long, heavy loads need to move through a production or logistics site, a standard platform trolley can be too short. This long material trolley combines a 3500 kg load capacity with three selectable lengths: 4500, 5500 and 6000 mm. It is suitable for pipes, steel sections, bars and other long items that require a dedicated transport solution.
The electro-galvanised tubular steel construction is designed for demanding material handling. Four separate corner posts provide a clear distance of 1160 mm between the posts. A 1210 mm drawbar with a towing eye gives the trolley a defined connection point for compatible towing equipment. Four fixed wheels, each 540 mm in diameter, support the load.
"*" indicates required fields
This long material trolley is made for pipes, bars, profiles, beams and other heavy items that need support across a greater length. Its 3500 kg load capacity suits demanding material movements in production, warehouse and logistics environments. The trolley can be set to 4500, 5500 or 6000 mm, so one unit can handle several load lengths. Four separate corner posts, a drawbar with a towing eye and four large fixed wheels complete the open layout.
The choice of three length settings is one of the main advantages of this long material trolley. Select 4500 mm for shorter material, 5500 mm for an intermediate setup or 6000 mm when the full length is required. The maximum distance between the axles is 6000 mm.
Matching the trolley length to the material makes it easier to plan how the load will sit between the two ends of the trolley. The selected setting should be checked and secured before loading begins. The load itself must also remain within the stated 3500 kg capacity and be positioned according to the applicable workplace instructions.
With a load capacity of 3500 kg this heavy-duty material trolley is intended for work that exceeds the scope of a light warehouse cart. It can be used for long steel sections, pipes, bars, beams and similar items, provided that the load fits the trolley and the stated capacity is not exceeded.
The electro-galvanised tubular steel construction gives the trolley a strong frame and adds surface protection to the steel. Its open layout keeps the loading area accessible. This is useful when long material needs to be transferred as one load rather than divided into shorter pieces.
The long goods trolley is supplied with four separate corner posts. The clear distance between the posts is 1160 mm. The posts mark the sides of the carrying area at both ends of the trolley. They help define where the load should sit, but they do not replace suitable load securing.
The 1210 mm drawbar ends in a towing eye, giving the material handling trolley a defined connection point for compatible towing equipment. This distinguishes it from a push-only platform trolley. The connection, route and operating method should be checked against local site requirements before use.
The trolley runs on four fixed wheels with a diameter of 540 mm. This measurement is useful when comparing the model with smaller workshop trolleys. As the wheels are fixed rather than swivel castors, the route and the space available for changes of direction should be considered during planning.
